BMS for Solar Street Light
3S 4S 11.1V 14.4V BMS with 3A~10A Lithium Battery PCB Board for Solar Street Light
MOKOEnergy’s smart BMS supercharges your solar street lighting systems. Our solar-optimized design maximizes energy harvest for superior light output and cost savings. Robust protection prevents battery damage even in extreme conditions. With high efficiency, reliability, and advanced battery management, MOKOEnergy’s BMS for Solar Street Light unlocks the full potential of your off-grid solar lighting. Contact us to integrate our high-performance solar BMS into your street lights and solar fixtures.
Key Features of BMS for Solar Street Light Battery
> Enhanced Solar Harvesting – Advanced MPPT algorithm maximizes energy capture in all conditions.
> Rapid Over-discharge Protection – Disconnects load within 10ms to prevent battery damage.
> Adaptive Power Management – Optimizes light output based on battery state and solar availability.
> Anti-aging Technology – Proprietary solution extends battery lifetime by 3-5 years.
> High Efficiency Performance – Achieves 98% charge and discharge efficiency, reducing energy waste.
> Redundant Dual MCU Design – Ensures highest reliability and uptime with dual microcontroller units.
> Integrated Buck/Boost Function – Minimizes BOM cost and size with integrated design.
> Bidirectional Power Conversion – Enables batteries to supplement solar input for increased efficiency.
Parameters of BMS Board for Solar Street Light
Model Number
BPU-01
Input voltage range
12V - 24V
Continuous discharge current
10A
Maximum charge current
8A
Supported lamp types
Lead-acid, lithium-ion
Cell count range
12V - 36 cells, 24V - 18 cells
Operating temperature range
-20°C to 60°C
Protections
Over-voltage, under-voltage, over-current, short circuit
Communication interfaces
RS485
Cell balancing
Passive balancing
Measurements
Voltage, current, temperature
Enclosure rating
IP65
Dimensions
160mm x 120mm x 60mm
Weight
0.8g
Remote monitoring
Optional GPRS/3G telemetry
Compliance
CE, RoHS, UN38.3
Other features
Light/dark activation, timer function, battery over-discharge protection
9 Major Protections on PCB For LED Solar Street Lights
Overvoltage Protection
Undervoltage Protection
Short Circuit Detection
Cell Voltage Monitoring
State-of-Charge Estimation
Thermal Management
Fault Diagnosis
State-of-Health Estimation
Communication Interface
FAQs of Battery Managemenet System For LED Street Light
The BMS optimizes battery performance for extended illumination, extends battery life, and ensures safe and reliable power supply for your outdoor lighting.
The BMS is built into the battery enclosure and wired to the solar panel, LED driver, and lighting controller.
Yes, you can monitor key battery parameters, ensuring your lighting systems’ batteries remain in optimal condition for effective and uninterrupted outdoor illumination.
